CERIUM(III) 2-ETHYLHEXANOATE - Names and Identifiers
CERIUM(III) 2-ETHYLHEXANOATE - Physico-chemical Properties
Molecular Formula | C24H45CeO6
|
Molar Mass | 569.73 |
Density | 1,08 g/cm3 |
Melting Point | >300°C(lit.) |
Flash Point | 110°C |
Water Solubility | Insoluble in water. |
Appearance | liquid |
Specific Gravity | 1.08 |
Color | viscous |
Exposure Limit | ACGIH: TWA 5 mg/m3 |
Storage Condition | Room Temprature |
Sensitive | 4: no reaction with water under neutral conditions |
MDL | MFCD00014004 |
CERIUM(III) 2-ETHYLHEXANOATE - Risk and Safety
Hazard Symbols | Xn - Harmful
|
Risk Codes | R20/21/22 - Harmful by inhalation, in contact with skin and if swallowed.
R36/37/38 - Irritating to eyes, respiratory system and skin.
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36 - Wear suitable protective clothing.
|
WGK Germany | 3 |
TSCA | Yes |
CERIUM(III) 2-ETHYLHEXANOATE - Nature
morphology |
liquid |
Specific gravity |
1.08 |
color |
viscous |
water solubility |
Insoluble in water. |
hydrolysis sensitivity |
4: no reaction with water under neutral conditions |
EPA chemical information |
Cerium(III) 2-ethylhexanoate (56797-01-4) |
Last Update:2024-04-10 22:29:15
CERIUM(III) 2-ETHYLHEXANOATE - Introduction
CERIUM(III) 2-ETHYLHEXANOATE is a chemical compound with the formula Ce(EHMA)4, where EHMA stands for ethylhexanoic acid. The following is a description of the nature, use, formulation and safety information of CERIUM(III) 2-ETHYLHEXANOATE:
Nature:
CERIUM(III) 2-ETHYLHEXANOATE is a colorless to light yellow solid with good solubility at room temperature. It is a stable compound and is not easily affected by air, moisture and light. It can form stable complexes in solvents.
Use:
CERIUM(III) 2-ETHYLHEXANOATE is commonly used as a catalyst and stabilizer. As a catalyst, it is often used in organic synthesis reactions such as Carbonylation and oxidation reactions. It can also be used in the dye industry and in the paint industry.
Preparation Method:
The preparation of CERIUM(III) 2-ETHYLHEXANOATE generally involves three steps. First, ethyl N-hexanoic acid and a cerium salt are dissolved in a suitable solvent to form a complex. Then, by crystallization and drying, a solid of CERIUM(III) 2-ETHYLHEXANOATE was obtained. Finally, the resulting solid is crushed and sieved to obtain the desired product.
Safety Information:
CERIUM(III) 2-ETHYLHEXANOATE is not currently recognized as hazardous to human health. However, as a basic principle of safe operation, the use of any chemical substance requires compliance with basic safe operating procedures, such as wearing appropriate protective equipment (such as gloves, goggles and laboratory coats), avoid direct contact with skin and eyes. In the use of the process, should avoid inhalation of its dust or vapor, avoid ingestion, keep the work area well ventilated. In the event of any accident or discomfort, medical assistance should be sought immediately.
Last Update:2024-04-10 22:29:15
CERIUM(III) 2-ETHYLHEXANOATE - Security information
Last Update:2024-04-10 22:29:15